用途及特點：
l  兩擋速度 ,，所有的傳動齒輪都是用優質鋼制造
l  輸出軸可換向,，以便緊固和擰松
l  耐磨,、自調節的金屬錐形離合器
l  離合器和軸承壓力循環潤滑
l  液壓扭矩設定，輸出扭矩可以通過液壓伺服機構控制,，準確調節,，并從扭矩指示器上讀出
l  符合人機工程學的設計，只需按高度可調的手桿即可輕松作業
l  通過switch-off 操縱桿即可方便地獲得較大的瞬時沖擊扭矩
l  液壓伺服控制裝置具有緊急控制功能
l  帶耐磨軸承和絕緣滾輪的單軌車架（可選：雙軌車架）
l  帶絕緣的雙向可自由伸縮的懸臂支撐
NLB-700 Universal Power Wrench
Description:
l  Two shifts of spindle speed. All transmission gears are made of high quality steel.
l  The directions of spindle revolution are reversible for tightening and loosing work.
l  Wear-resisting and self-adjusting cone clutch made of steel.
l  Enforced recycling lubricating of the clutch and bearings offers and excellent tightening work.
l  The output torque can be preset, controlled and adjusted accurately via a hydraulic servo, and the actual torque readout displays on a torque indicator.
l  Ergonomic designing machine. All the operation could be done by simply pressing down the height-adjustable hand lever.
l  Impact torque can be obtained by turning the switch-off lever.
l  Hydraulic servo actuate in case of over loading.
l  Mono-rail chassis with anti-friction bearings and insulating roller (optional bilateral-rail chassis).
l  Retractable jib with insulating rollers.
 
技術參數：
發動機：本田GX200單缸空冷四沖程汽油機
功率：4.9kW（3800rpm）（優化設計的飛輪保證了發動機極其平滑的運行性能,，噪音低,、污染小，具有缺少機油自動停機保護功能）
主軸：低速：71rpm    高速：186rpm
可調扭矩：0～450Nm
最大扭矩：700Nm
瞬時沖擊扭矩：1000Nm
主機質量：88kg
外型尺寸（長×寬×高）：1750×600×750mm
 
Technical Data:
Engine: Honda GX200 air-cooled single cylinder 4-stroke petrol engine
Output Power: 4.9kW (3800rpm)(Extremely smooth running due to incorporated flywheel. Low noise and low pollution. Stop automatically in case of lack of lubricant. )
Spindle Speed:  Low speed: 71rpm   High speed: 186rpm
Adjustable Torque: 0 ~ 450Nm
Max. Torque: 700Nm
Impact Torque: 1000Nm
Weight: 88kg
Dimensions（L×W×H）: 1750×600×750mm